How to set up ping monitoring for servers and network devices
A step-by-step guide to ping monitoring in Spot Downtime: add a host, allow ICMP through your firewall, and know when to use a TCP check instead.
· 3 min read · By the Spot Downtime team
Some machines don't run a website or expose a port worth checking: routers, firewalls, VPN gateways, IoT devices. A ping monitor sends ICMP echo requests and alerts you when the host stops replying, with the round-trip time of every check.
ping 1
23 ms
ping 2
21 ms
ping 3
25 ms
Step 1: create the monitor
- Open Monitors, click Add monitor and choose Ping.
- In Hostname or IP address, enter something like
server.example.comor203.0.113.10. - Pick how often to Check every, then click Add monitor.
Add a monitor
Hostname or IP address
203.0.113.10
Name
Office VPN gateway
Check every
5 minutes
Each check sends 3 pings. One reply within 2 seconds is enough to count as up, and a failed check is retried before an incident opens, so a single lost packet doesn't alert anyone.
Step 2: make sure ping isn't blocked
Many cloud providers and firewalls block ICMP by default, and a blocked host shows as down even when it's fine. Test from your own machine first:
ping -c 3 203.0.113.10If nothing comes back, allow ICMP echo requests in your firewall or security group:
- AWS: add an inbound rule to the security group for “All ICMP - IPv4” (or just Echo Request).
- Linux with ufw: ping is allowed by default; check
/etc/ufw/before.rulesif it isn't. - Can't allow ICMP? Use a TCP port check on a port the host already serves, such as 22 or 443.
Step 3: test the alert
Connect a channel under Alerts and press Send test. Watch the response-time chart for a day: a steady round trip that suddenly climbs is often the first sign of a network problem.
Good to know
- Private addresses can't be pinged. The device must be reachable from the internet.
- A ping monitor on a domain name also warns you before the domain expires.
- Ping says the machine is on, not that its services work. Pair it with a website or TCP check.
More in this series
Get new guides by email
Practical posts on monitoring, outages, error fixes and on-call, when they're published. No spam.
Keep reading
- How-to · Monitoring · APIsHow to configure gRPC health checkingLearn how to implement and configure gRPC health checking for reliable service discovery and load balancing: server status, Kubernetes probes, client-side health checks, Envoy, cloud load balancers and Consul.November 7, 2026 · 7 min read
- How-to · Servers · MonitoringHow to monitor CPU, memory and disk usage on a Linux serverCheck CPU, memory and disk on Linux with top, free and df, learn which numbers actually matter, pick sensible alert limits, and get alerted before a server runs out.November 4, 2026 · 8 min read